Unimelt 120
APAO based hotmelt for assembly of foams, textiles, wood, and plastics. Flexible joint. Softening point 120°C, viscosity 6000 mPas at 160°C., open time about 55 s.
Main features: high heat resistance, very good adhesion on miscellaneous surfaces.
Unimelt 330
Rubber based PSA hotmelt, softening point 115°C, viscosity 10 000 mPas at 170°C. Used for textiles lamination, PSA goods, insulation etc.
Main features: high temperature resistance, excellent adhesion on plastics.
Unimelt 333
Rubber based PSA hotmelt, softening point 100 °C, viscosity 1.700-2.300mPa.s at 170 °C. Used for textiles lamination, PSA goods, insulation etc.
Main features: can be foamed with nitrogen, low melt viscosity, versatile use for nonwovens.
Unimelt 334
Rubber based PSA hotmelt, softening point 125 °C, viscosity 20 000 mPas at 170°C. Used for difficult-to-bond surfaces, PSA goods etc.
Main features: very high heat resistance, excellent adhesion on plastics.
Unimelt 338
Rubber based PSA hotmelt, softening point 100 °C, viscosity 1.700-2.300mPa.s at 170 °C. Used for difficult-to-bond surfaces, PSA goods, textile lamination etc.
Main features: can be foamed with nitrogen, low melt viscosity, versatile use for nonwovens, economical use (low consumption).
Unimelt 654
Reactive polyurethane hotmelt for high demanding application where very high tensile strength and heat resistance is needed. Broad adhesion range (textiles, plastics, metals, wood), working temperature 140°C, viscosity 15 000 mPas at 140°C, crosslinking during 3-7 days, open time about 60 seconds.
Main features: versatile use, excellent adhesion on variety of surfaces.
Unilep Spray H6
Sprayable base, 55% solids, 350mPas viscosity, temperature resistance up to +60° C. Usable for general upholstery and mattrasses.
Main features: new product, durable use.
Unilep Spray H24
Sprayable base, 26% solids, 750mPas viscosity, temperature resistance up to +100° C. Usable for car interiors.
Main features: excellent adhesion to plastics and metals and PVC.
DALŠÍ AKČNÍ NABÍDKY A NOVINKYUnilep Spray Profi New
Aerosol packed solvent - flammable base, 35% solids, temperature resistance up to +60° C. Usable for general upholstery and mattresses.
Main features: repairs, decoration. Very helpful.
Akrylep 427 + Leabond 2KB
Water based, two way sprayable, 56% solids, 100mPas viscosity, temperature resistance up to +120° C. Usable for general upholstery, mattrasses and car interiors.
Main features: new product, durable use.
